Search

Search found 255 matches

by stephen
Fri Apr 19, 2019 4:27 pm
Forum: Sales and Wants
Topic: brake parts
Replies: 3
Views: 16

Re: brake parts

I have a vague idea that a particular landrover brake cylinder is an almost identical swap, The only difference was something like a bolt hole in the backing plate is a touch small and needs to be drilled out to next size up [or something like that] sorry I cant be much morehelp than that - details ...
by stephen
Wed Feb 27, 2019 12:47 pm
Forum: Technical
Topic: differential locks on front wheels?
Replies: 8
Views: 277

Re: differential locks on front wheels?

if you fit freewheeling hubs on the front axles - and leave them unlocked for extended periods there is the risk of your top king pin bearings running dry. The top kingpins rely on the turning axle to "sling" grease up onto the bearing. As for locking differentials - there is a crew in India making ...
by stephen
Thu Dec 06, 2018 9:17 am
Forum: Technical
Topic: Model ident and wiring etc
Replies: 25
Views: 2656

Re: Model ident and wiring etc

Several of the blokes on this forum have done a "top-chop" to their mindies - to make WW2 jeep lookalikes, there is a fair chance they might have the discarded wiper arms stashed away. At least one forum member has removed the original wipers, wiper motor, and did what his missus referred to as a "m...
by stephen
Fri Nov 30, 2018 11:50 am
Forum: Technical
Topic: Model ident and wiring etc
Replies: 25
Views: 2656

Re: Model ident and wiring etc

A quick google found these -give Ahmed a call and see if he can supply. CJ gauge panel https://www.ebay.com.au/itm/New-Mahindra-Willys-Jeep-Dash-Board-Meter-Plate-Gauge-Plate-Steel-Black/273577198965?hash=item3fb278c575:g:IWEAAOSwgKRb0D2h DATA plates [might be able to supply Mahindra versions] https...
by stephen
Wed Nov 28, 2018 3:36 pm
Forum: Technical
Topic: Model ident and wiring etc
Replies: 25
Views: 2656

Re: Model ident and wiring etc

p.s. there should be a 40 litre diesel tank under the passenger seat, and a 20 litre under the drivers seat. the passenger tank is the main tank, and feeds directly to the filters and engine. the drivers tank is the reserve, and gets pumped into the main tank via a dashboard switch and electric pump...
by stephen
Wed Nov 28, 2018 2:40 pm
Forum: Technical
Topic: Model ident and wiring etc
Replies: 25
Views: 2656

Re: Model ident and wiring etc

virtually all parts are available from "Ahmed" who is based in India, his contact details are somewhere on this forum [someone will chime in and point you towards him]. Ahmed's prices are decent, and he has proven to be very reliable to many of us here. Yours looks to be the "Stockman" version - bas...
by stephen
Tue Nov 27, 2018 2:26 pm
Forum: Technical
Topic: Model ident and wiring etc
Replies: 25
Views: 2656

Re: Model ident and wiring etc

.. ps could you do me a favour and take a good close picture off Mahindra dash plate as mine has none cheers a bloke in [iirc] Holland makes reproduction data plates for all sorts of jeeps A few years ago I sent him close up photos of the Mahindra data plates, as they were one of the few he did not...
by stephen
Tue Nov 27, 2018 2:17 pm
Forum: Technical
Topic: Model ident and wiring etc
Replies: 25
Views: 2656

Re: Model ident and wiring etc

Aussie spec. brake booster, twin fuel filters, roll cage identical to mine, heater unit, dodgy cable trunking used for the demister..... 'Stockman" spec' seats, Does your mindie have the long tool box running behind the seats - between the wheel tubs?? Looks much like mine [except for the lack of in...
by stephen
Sun Nov 25, 2018 11:32 am
Forum: Technical
Topic: Model ident and wiring etc
Replies: 25
Views: 2656

Re: Model ident and wiring etc

adjustable high back bucket seats on sliders?
aftermarket brake booster,
roll bar [if it is diagonal braced]

sounds like we might have another Aussie spec Mindie surfacing!

need to see photos and serial numbers
by stephen
Tue Jun 26, 2018 11:21 am
Forum: Technical
Topic: olde schoole looking mindy diff locks!!
Replies: 0
Views: 769

olde schoole looking mindy diff locks!!

Stumbled on this link, might not be "proper" olde schoole - but certainly looks like it! Cable operated Dana44 diff locks made in India, by Lamda. Since they are of India manufacture - I assume they fit our CJ340's, as they have DANA 44 diff's front and rear. No idea of how good they are, or what th...
by stephen
Tue May 01, 2018 4:20 am
Forum: Technical
Topic: Diesel Tank
Replies: 2
Views: 1152

Re: Diesel Tank

no pump in my tanks, I have seen damaged or rusted out fuel tanks in Tojo's, Zook's, Trolls and 1 x mindie replaced with plastic boat tanks - as used for outboard motors. Usually they were strapped to the floor of the tray, or over the rear wheel arch. A plastic boat tank has the advantage of a fuel...
by stephen
Sat Apr 28, 2018 9:29 am
Forum: Technical
Topic: Stupidly high oil pressure!
Replies: 9
Views: 3629

Re: Stupidly high oil pressure!

well......that was a good idea while it lasted! LDV 400's were not (as far as I can determine) imported into Australia. I have been wracking my brains trying to help a fella on the other side of Australia - his CJ340DP engine is probably cactus. One of the cylinder head studs has snapped off and due...
by stephen
Fri Apr 27, 2018 3:17 pm
Forum: Technical
Topic: Stupidly high oil pressure!
Replies: 9
Views: 3629

Re: Stupidly high oil pressure!

Hi Ollie,

Can you clarify which model LDV's have the engine that suits being bolted into mahindras?

Thanks,

stephen
by stephen
Thu Apr 26, 2018 3:01 pm
Forum: Technical
Topic: Brake fluid DOT 3 - 4 or 5?
Replies: 2
Views: 881

Re: Brake fluid DOT 3 - 4 or 5?

I only know of one bloke who has switched over to silicon brake fluid. He reckoned the way to go is either the best and most thorough flush of your brake system you have ever done, to ensure all traces of conventional fluid are gone, or even better, to replace all the rubber components after flushin...
by stephen
Tue Apr 03, 2018 2:05 pm
Forum: Technical
Topic: PTO
Replies: 12
Views: 3479

Re: PTO

Well.....I survived crawling through my shed! no bandaids needed [for once] The P.T.O. cog that butts up into the transfer case has 15 teeth / splines on both my P.T.O.'s, Interestingly, the housings of both of mine are virtually identical apart from one having a ruddy great long part or serial numb...