REAR HUB HELP

Technical questions and answers
Post Reply
GRANDAD
Posts: 89
Joined: Mon Feb 06, 2017 11:54 am

REAR HUB HELP

Post by GRANDAD » Wed Feb 27, 2019 7:02 am

HI ALL JUST SERVICING BRAKES 2 SEIZED CYLINDERS I FRONT 1 REAR NOW REPAIRED :good: MANAGED TO REMOVE 1 REAR HUB BUT THE OTHER REAR HUB IS SOLID :banghead: THE KEY WAY ON HUB THAT CAME OF WAS LEVEL WITH HUB .. THE SOLID HUB LOOKS LIKE KEY WAY IS LIKE ITS BEEN KNOCKED IN , NOT PUSHED IN BY NET AND WASHER ANY HELP WOUL BE GREAT

User avatar
kev
Technical Expert
Posts: 1256
Joined: Tue Apr 01, 2008 8:58 pm
Location: west mids

Re: REAR HUB HELP

Post by kev » Wed Feb 27, 2019 9:18 pm

Have you an hub puller
They should not com off without one if it did that one was not fitted correctly

GRANDAD
Posts: 89
Joined: Mon Feb 06, 2017 11:54 am

Re: REAR HUB HELP

Post by GRANDAD » Sun Apr 14, 2019 7:11 am

:yahoo: :yahoo: :tease: :tease: REAR HUB OFF :clap: :clap: :clap: HUB PULLER OF EBAY FROM GERMANY £30 … THE PROBLEM WAS THE PREVIOUS OWNERS HAD KNOCKED THE KEY WAY IN WITH A PUNCH THE KEY WAY SHOULD BE DRAWEN IN BY WASHER AND NUT EVEN WITH THE PULLER WE HAD TO DRILL DOWN THE OLD KEY WAY WITH 6mm DRILL BIT TO EASE SOME TENSHION OFF THE HUB :thumbsup: NEW KEY WAY AHAMED INDIA

Post Reply