Workshop Manual

Technical questions and answers
Post Reply
Andy4033
Posts: 44
Joined: Wed Feb 19, 2014 4:08 pm

Workshop Manual

Post by Andy4033 » Tue Jul 01, 2014 11:49 am

Hi all

Thanks Alan for the W.M . But Am more confused then ever it has no information on the hydraulic Clutch fitted to mine??? still its a good read LOL . I removed my old unit and severed the line in, dose anyone know the size? I am in contact with Ahmed (India) regarding the clutch parts . So all is looking up apart from the fact it has not moved for the past week round at the garage it was taken to????

Andy

Going nowhere.

User avatar
polly
Posts: 192
Joined: Sun Oct 16, 2011 7:48 pm

Re: Workshop Manual

Post by polly » Tue Jul 01, 2014 11:24 pm

Im almost certain all the hydraulic fittings are 3/8 UNF
thats assuming it is the correct cylinders.

if the toyota and mitsubishi slave or master cylinder have been fitted then the fittings will be metric.

Andy4033
Posts: 44
Joined: Wed Feb 19, 2014 4:08 pm

Re: Workshop Manual

Post by Andy4033 » Wed Jul 02, 2014 8:25 am

So update on the Broken clutch been to the garage was told the master cylinder was broken and was looking for a replacement?????? When I explained that the reason the piston of the master cylinder was missing was due to the fact the clutch release fork rattled around like a bell clapper and was not engaged with anything inside he relented and agreed to have another look. French engineering

Post Reply