PTO

Technical questions and answers
Post Reply
GRANDAD
Posts: 71
Joined: Mon Feb 06, 2017 11:54 am

PTO

Post by GRANDAD » Sun Mar 11, 2018 10:41 pm

HI ... JUST GOT MY SELF .. A .. PTO BOX PROP GEAR .. PROP WILL BE TO SHORT AS MY MINDY IS CJ540 .. BEEN TOLD QUIT RARE :scratch: :scratch: :hello: MY NEED SOME HELP BUT LOOKS EASY TO FIT ANY ONE ELSE GOT ONE

GRANDAD
Posts: 71
Joined: Mon Feb 06, 2017 11:54 am

Re: PTO

Post by GRANDAD » Mon Mar 12, 2018 12:57 pm

:hello: :hello: :hello:
Attachments
SAM_6432.JPG
SAM_6431.JPG
SAM_6430.JPG

User avatar
kev
Technical Expert
Posts: 1237
Joined: Tue Apr 01, 2008 8:58 pm
Location: west mids

Re: PTO

Post by kev » Tue Mar 27, 2018 11:16 pm

Hi
looks good I have one ,took off a jeep easy to fit

Kev

stephen
Posts: 290
Joined: Thu Mar 24, 2011 1:37 pm

Re: PTO

Post by stephen » Thu Mar 29, 2018 1:23 pm

All Aussie spec CJ340DP Mindies came with P.T.O. as standard.

I have a vague feeling that not all "jeep" P.T.O's may interchangeable / something to do with cogs being different.

"hermtheoverdriveguy" has a different listing for overdrives to suit Mahindras, due to a different tooth count [or something like that]

might be worth a bit of research.

on a related vein - anyone ever seen a 3 point linkage on a CJ3B? and have decent photos, diagrams and tech. info?
Stephen
--------------
(I'm one of those damn colonials rattling his chains)

GRANDAD
Posts: 71
Joined: Mon Feb 06, 2017 11:54 am

Re: PTO

Post by GRANDAD » Fri Mar 30, 2018 3:56 pm

hi thanks foe reply ... iM rebuilding the pto box bearings and seals .. you may be right ill let you no in the coming mounths .. I think it came off a cj2a 1940s / 50s if it dose not fit ill sell it one on ebay $400 when refurbished probably stand me at £60 A COMPANY CALLED BEARING MART AND HRS SEALS HAVE SIZED UP MY DIFF PINION SEAL FOR MINDY.. ILL LET YOU NO HOW IT GOES :beg: :beg:

User avatar
kev
Technical Expert
Posts: 1237
Joined: Tue Apr 01, 2008 8:58 pm
Location: west mids

Re: PTO

Post by kev » Sat Mar 31, 2018 9:02 pm

If its not off a Mahindra it wont fit
There's a different teeth count
did you get a prop with the pto

stephen
Posts: 290
Joined: Thu Mar 24, 2011 1:37 pm

Re: PTO

Post by stephen » Sun Apr 01, 2018 12:35 pm

If your P.T.O. doesn't fit - give "hermtheoverdriveguy" an email - he might be able to supply the cogs needed to convert yours so it matches up to the mindie transfer case.
Stephen
--------------
(I'm one of those damn colonials rattling his chains)

GRANDAD
Posts: 71
Joined: Mon Feb 06, 2017 11:54 am

Re: PTO

Post by GRANDAD » Sun Apr 01, 2018 7:59 pm

hi I have the pto . prop and rear gear box that bolts to the chassis thanks for ......replys

stephen
Posts: 290
Joined: Thu Mar 24, 2011 1:37 pm

Re: PTO

Post by stephen » Mon Apr 02, 2018 2:50 pm

The link below will get you to herm's info regarding overdrives,
The P.T.O. is usually removed and the overdrive takes it's place - but herm has an adaptor so you can run both the overdrive AND the P.T.O.
The link has a listing of which overdrives suit which particular make and/or model of jeep, there is also instructions for determining how many teeth your transfer case has [which will relate directly to your P.T.O.]

When you nail down which P.T.O. you have - and confirm that your transfer case is a Mahindra, give herm a buzz and see if he can supply the correct cogs to match your P.T.O to your transfer case.

You have me a bit jealous - I have been looking for a P.T.O. rear gearbox for some time, with no luck - and have been tempted to cobble one together using salvaged bits and pieces.
[the rear cross member mounted gearbox is normally a 1:1 ratio - all it does is reverse the direction of rotation.]

I have 2 x Mahindra P.T.O.'s in my shed, tomorrow I will dig them out and count the teeth for you as a reference.


http://hermtheoverdriveguy.com/application-information
Stephen
--------------
(I'm one of those damn colonials rattling his chains)

GRANDAD
Posts: 71
Joined: Mon Feb 06, 2017 11:54 am

Re: PTO

Post by GRANDAD » Mon Apr 02, 2018 6:47 pm

HI STEPHEN CHEERS THAT WOULD BE GREAT :yahoo: :yahoo: :yahoo: :yahoo:

GRANDAD
Posts: 71
Joined: Mon Feb 06, 2017 11:54 am

Re: PTO

Post by GRANDAD » Mon Apr 02, 2018 6:57 pm

HI STEPHEN CHEERS THAT WOULD BE GREAT :yahoo: :yahoo: :yahoo: :yahoo: HERE ARE SOME PICs OF REAR GEAR BOX FOR PTO
Attachments
SAM_6467.JPG
SAM_6465.JPG
SAM_6467.JPG
SAM_6466.JPG
SAM_6464.JPG

stephen
Posts: 290
Joined: Thu Mar 24, 2011 1:37 pm

Re: PTO

Post by stephen » Tue Apr 03, 2018 2:05 pm

Well.....I survived crawling through my shed!
no bandaids needed [for once]

The P.T.O. cog that butts up into the transfer case has 15 teeth / splines on both my P.T.O.'s,

Interestingly, the housings of both of mine are virtually identical apart from one having a ruddy great long part or serial number stamped into the housing, while in the same location on the other there is only two digits or numerals cast into the housing [that I cant read].

Both are taken from Aussie specification CJ340DP Mahindra manufactured transfercases.


I can't get a clear view of the teeth / splines in your second photo - but it looks like you might be lucky!
Stephen
--------------
(I'm one of those damn colonials rattling his chains)

GRANDAD
Posts: 71
Joined: Mon Feb 06, 2017 11:54 am

Re: PTO

Post by GRANDAD » Tue Apr 03, 2018 3:44 pm

hi thanks for your time . yes 15 teeth :yahoo: :hello: my mindy is 540 so prop my have to be extended I was thinking of registering as agricultural to see if can lower tax but not to sure if this works any more .. thanks again

Post Reply